a. HB-632 Bender: Used for the bending of heavy wall     tubing, from 3/4" – 2" tubing, as well as 6mm – 50mm     tubing as 1/2'' to 1-1/2'' Schedule 80 Pipe b. 424 Crank Bender: Used for the bending of Thin wall     tubing, from 1/2"- 1-1/4", as well as 6mm - 32mm     tubing c. 412 Crank Bender: Used for bending 1/4" thru 3/4"     tubing d. Parker Hydra tool: Used for the flaring of tubing ends to     37 degrees, from 1/4"- 2", as well as 6mm – 50mm     tubing e. Rigid 535: Threading Machine used for Pipe from 1/2"     pipe to 2", of any Schedule f. Power Pony: Used for Threading Pipe and Conduit from     1/2” to 4", of any Schedule g. Portable Band Saws h. Drill Motors i. Portable Mag Drill Press: for Specialty drilling j. 1800 Greenlee Mechanical Bender: Used for the bending     of Rigid, as well as aluminum conduit, from 1/2" to 1" k. 555R Greenlee Electrical Bender: Used for the bending     of Rigid, as well as aluminum conduit, from 1/2" to 2" l. One Shot and Sweep STB Series: Used for the bending of     heavy wall Pipe from 1/2" up to 4" m. Swagelok Pre-Setting Tool: Used for the Hydraulic     Presetting of ferrules from 1" up to 2" n. Auto Clave Manual Coning and Threading Tools: Used     for Coning and Threading of Autoclave tubing from 1/4”     to 9/16” o. Auto Clave Electrical Coning and Threading Tools: Used     for Coning and Threading of Autoclave tubing from 1/4"     to 1” p. Welding Machines. Electrical, Gasoline and Diesel q. Connexs for Mobilization: 25' and 8' x 8' r. Work Tables and Benches with Vices s. Tri-pod Chain Vices and Clamp Vices t. Oxygen and acetylene setups u. Brady TLS2200: Used for thermal printing wire tags v. Brady Plus: Used for field printing of wire tags w. Fluke Digital Megger: Equipment for the testing of the     insulation on cables x. 24VDC Power Supply: Used for the testing of equipment. y. 4-20 Milliamp Simulator z. Hose Crimper: Used for crimping hoses from 1/4" up to     2". Hose up to 10,000# Psi aa. Flushing Units for Both Water and Hydraulic Systems